EDN China > 设计实例 > 模拟设计 > 运放与功放 > 正文
? 2016博客大赛-不限主题,寻找电子导师,大奖升级??

Semtech公司为掌上电脑的EMI/RFI设计的RC滤波器

来源:EDN Blog/作者:Paul Rako?? 2007年08月10日 ?? 收藏0

  Protecting your circuits from RF interference is getting to be a big deal. I called on a LAN VOIP phone maker when I worked for National Semi. They had interference getting into their audio circuit from a cell phone set down a foot away from their office phone. It took some board redesign and the addition of small capacitors on critical nodes in order to keep the cell phone RF out of the analog audio signal path. And one mistake engineers make is using big-value physically-big capacitors. You are trying to filter out RF at 900, 1,800 or 1,900 MHz. You need picofarads in a tiny 0402 or smaller

case in order to have low impedance at those frequencies—be sure to look at the impedance plots for whatever cap you are thinking about using. Better yet, use parts like Semtech makes and rest assured that the parts will keep interfering RF signals out of your circuits.

  I was trying to filter out RF form an office phone, if you are designing a cell phone or handheld it is even tougher because then you have inches, not feet of separation. Your product might have Bluetooth, 802.11 as well as camera and cell phone systems. Keeping the RF from all those interfering sources out of your circuitry can be tough. Like most EMI issues, this one comes up right before you want to ship, so be sure to have an understanding of these issues; they are coming up more and more often.

  英文原文地址:http://www.edn.com/blog/1700000170/post/870011687.html


上一页12下一页
?? ?? ??


打开微信“扫一扫”,打开网页后点击屏幕右上角分享按钮

1.扫描左侧二维码
2.点击右上角的分享按钮
3.选择分享给朋友
?? ??

掌上电脑? EMI? RFI? RC滤波器?

相关文章

我来评论
美国的游客
美国的游客 ??? (您将以游客身份发表,请登录 | 注册)
?
有问题请反馈